ON INTERIOR SURFACES FP100 IS PERMANENT
UNLESS REMOVED BY EXTRAORDINARY MEANS

INTERIOR/EXTERIOR FIRE RETARDANT
COATING / SPRAY
FOR ALL WOOD PRODUCTS
PLYWOOD ● LUMBER ● TIMBER ● OSB ● I-JOISTS

Better Business Bureau

CALL US FOR OUR DAILY DISCOUNT ! ! !

Direct 1-817-740-9197

1-800-333-9197
Meet your fire retardant needs with confidence !
FP100 label
FIRE POLY TEST RESULTS
ASTM E2768 (30 Minute)ASTM E84, Class A; UL723, Type1; NFPA 255
ASTM D2898 Accelerated Weathering Test

 

INTERNATIONAL RESIDENTIAL CODE, IRC

 

LOW VOC


FIRE RETARDANT COATING SURFACE BURNING CHARACTERISTICS OF APPLIED COATING

Flame spread <10 lumber. < 5 plywood, 0 OSB; 0 I-joist
Smoke developed 125 lumber; 115 plywood; 40 OSB; 80 I-joist
Number of preliminary coats None
Rate per coat (ft2/gal) --
Number of fire retardant coats 1
Rate per coat (ft2/gal) 200
Number of overcoats None
Minimum Mil thickness 4
Flash point of liquid coating:  
   Fire retarding coating - closed cup, no flash

fire retardant logo

FIRE POLY™

TECHNICAL DATA

INTERIOR / EXTERIOR CLASS A FIRE RETARDANT COATING

PRODUCT DESCRIPTION:    Aqueous Based Resin

PRODUCT ANALYSIS
Total Solids
 63- 67%   PH
1.9 - 2.2
Weight per gallon
 13.2 - 13.3lbs Flash point
Non-Flammable
Specific gravity
 1.45 Color
Milky color dries clear .
Volatability
 Non-Volatile Solvents
Water(Contains no petroleum or derivatives of petroleum)
Anti-Fungus
 excellent Resistance Bacterial
Good Resistance
Linear shrinkage
 None Moisture Absorption
None
Corrosive
 Mildly Toxic
None (when dry)
Insects, rodents,
aspergilli And other types of molds
 Excellent resistance Termites
Excellent resistance
Preservative for wood
 Good Scrubability
1000 cycles
Volatile Organic Compound - VOC

RECOMMENDED USE: Interior/Exterior Class A, Type 1 Rating

FLAME SAFE FIRE POLY100 is a high intumescent fire retardant coating. It can be used on any type of wood, porous, or non-porous materials, such as:

Yellow pine Redwood Cedar Douglas Fir
OSB
Maple Oak Poplar Walnut
I-Joists
Cyprus Mahogany Teak SPF
Trusses
Glulams LVL, PSL Ponderosa Pine Plywood
Rim Board

ENVIRONMENTAL REGULATION:

This product complies will U. S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.

fire retardant logo

FIRE POLY™

QUICK REFERENCE FOR APPLYING

FIRE POLY™ FIRE RETARANT COATING
MATERIAL
APPLICATION
COVERAGE
Exterior/Interior wood
any type of wood		 Treat before, during or after construction.

Be sure surface is clean and dry before treating.

Apply with spray, brush or roller.

May be necessary to wipe on hardwood surfaces

Treat all surface areas where possible

Do not expose treated area to moisture for 24 hours.

Apply one (1) coat at the rate of 200 sq. ft. [18.58 square meters] per gallon [3.785 liters]

 
Flame Safe's Fire Poly™ FP100 high intumescent fire retardant coating swells as a result of heat exposure, converting combustible gases and tars to non-combustible carbon char causing the surface to bubble-up and thereby creating a barrier between the fire and the treated material. The carbon char is a poor conductor of heat, therefor it protects the substrate from excessive heat and fire.
high intumescent fire retardant coatinghigh intumescent fire retardant coating

EXTERIOR / INTERIOR WOOD

            All surfaces to be treated must be clean and dry. Fire Poly™ FP100 fire retardant coating is water-based, clear liquid that becomes insoluble when dry. On exterior wood Fire Poly™ FP100 can last five years or more, while maintaining a flame spread index of less than 25. In extreme weather conditions it may be necessary to re-coat surfaces every three to five years. On interior wood substrates, Fire Poly FP100 is a permanent and effective fire retardant for the life of the structure provided it is not removed by extraordinary means or exposed to extreme moisture conditions. It also acts as a preservative, waterproofing agent, ultra violet inhibitor, mold and mildew inhibitor, and it repels insects. If over coating is intended, Fire Poly™ FP100 fire retardant coating is an excellent surface primer for use under latex paints, or can be used as a finished coat over water based stains. Finished surfaces will exhibit semi-gloss to gloss finish similar to lacquers or epoxies.

DO NOT DILUTE OR MIX FIRE POLY™ FP100 FIRE RETARDANT COATING WITH ANY OTHER PRODUCTS.

            Contact parts of any equipment should be stainless steel or plastic to prevent chemical reaction and breakdown. Storage may be done in polyethylene containers.

            Fire Poly™ FP100 fire retardant coating when applied according to the manufacturer’s specifications is the most effective fire retardant coating available.

Clear fire retardant coating for interior use on all woods

A clear flame retardant coating for interior and exterior use. Lowest flame spread possible
Call for pricing and ordering 1-800-333-9197

CAUTION:

          Product must not freeze. It must not be thinned or diluted. Do not apply Fire Poly FP100 below 40°F (4.45°C) or relative humidity conditions greater than 80%.

OVERSPRAY:

        The overspray will not harm plants or animals. Spills can be flushed with water. A rag wetted with   bleach and water mix will clean up spotting.

CLEAN UP PROCEDURE:

          Airless Equipment.

1. Run clear water through the system until coating is flushed out. When minor sudsing on surface stops, the system is flushed.

2. Run bleach and water mix (1 part to 4 parts) through system as solvent for cleaning any residue.

            3. Repeat Step 1 if any foaming occurs in Step 2.

            4. Lubricate system as specified by equipment manufacturer to combat rusting.

If two or more applications are planned in the same day, the sprayer can be kept clean by running water through the system between applications.

          Brushes/Rollers.

              1. Clean immediately after use.

              2. Wash thoroughly with bleach and water mix (1 part to 4 parts).

SAFETY FIRST

Use approved safety devices (ropes, belts, ridge hooks, ladder, etc.) When working on steep or high areas. Take EXTREME CARE not to step on wet treated area. Surface may be slick until dry.

It is good practice to wear respirator or mask and protect hands with rubber gloves when spraying any coating or chemical. When engineered air control is not feasible, use properly maintained and properly fitted NIOSH approved respirator for solvent vapors. A dusk mask does not provide protection against vapors.

If eye contact occurs, flood with water for fifteen (15) minutes and call a physician. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.

Outdoor PatioEXTERIOR PATIO
INTERIOR WOOD APPLICATIONS
CALL FOR OUR DAILY DISCOUNT ! !
Email: fireprod@aol.com

HOME | CONTACTS | PRODUCTS |Fire Poly FP100 MSDS |TESTING